The multi-10 channel transmitter "MTX - 10F" was completed in March 2016.
added rudder and elevator trim switches to the 6 channel "MTX - 6" completed in September 2012 to make it 10 channels.
I am using PIC16F628A. (Futaba mode)
MTX-6 flight (MTX-10F has not flight yet)
fun transmitter that can hear a lead tone.
For details, please see the blog post.
(MTX-10F)
https://oteru0106.exblog.jp/24235870/
(MTX-6)
https://oteru0106.exblog.jp/18870187/
oteru
Multi 10 channel transmitter "MTX - 10F"
- oteru
- Posts: 26
- Joined: 25 Feb 2018, 00:54
- Location: Fukuoka Prefecture Japan
- Contact:
- Wayne_H
- Posts: 811
- Joined: 17 Feb 2018, 05:26
- Location: Temora, NSW. Australia
- Contact:
Re: Multi 10 channel transmitter "MTX - 10F"
Congratulations - yet another fine Tx
Do you find the continuous tones or beeping distracting at all? Are you able to turn the tones off?
Do you find the continuous tones or beeping distracting at all? Are you able to turn the tones off?
Cheers,
Wayne
Once a Retrobate, always a Retrobate............
Wayne
Once a Retrobate, always a Retrobate............
- oteru
- Posts: 26
- Joined: 25 Feb 2018, 00:54
- Location: Fukuoka Prefecture Japan
- Contact:
Re: Multi 10 channel transmitter "MTX - 10F"
I am replaying the sound of the lead relay of the lead receiver to the transmitter and enjoying it.
Tones and beep sounds can be switched in volume in three steps, but you can not stop the sound.
oteru
Tones and beep sounds can be switched in volume in three steps, but you can not stop the sound.
oteru