Staveley receiver servo plugs
-
- Posts: 53
- Joined: 22 Feb 2018, 21:03
Staveley receiver servo plugs
Are the servo plugs for the Staveley digital 27MHz receiver still available somewhere? They seem to be similar to the old Skyleader ones but with a slightly different pitch.
-
- Posts: 53
- Joined: 22 Feb 2018, 21:03
Re: Staveley receiver servo plugs
Hi Phil,
2 photos showing receiver socket and plug.
Spacing on the group of 3 is around 1.85mm and 2.9mm for the polarising pin.
2 photos showing receiver socket and plug.
Spacing on the group of 3 is around 1.85mm and 2.9mm for the polarising pin.
-
- Posts: 30
- Joined: 18 Jun 2019, 03:48
- Location: Eden, MD USA
Re: Staveley receiver servo plugs
The plug and socket look just like the old Kraft plugs.
John H.
"Here's another fine mess you've gotten me into."
"Here's another fine mess you've gotten me into."
-
- Posts: 668
- Joined: 16 Feb 2018, 06:19
- Location: Varberg or Stockholm, Sweden
Re: Staveley receiver servo plugs
I see, I have plenty of Kraft original connectors so PM me with your needs. They are brand new and comes with the leads. Do you need 3 or 4 leads, i.e. with or w/o center tap
Horizon were using the same connectors however the Kraft were crimped to the wire as the Staveley and the Horizon had soldering tabs.
Horizon were using the same connectors however the Kraft were crimped to the wire as the Staveley and the Horizon had soldering tabs.
Cheers,
Tobe
Tobe
-
- Posts: 53
- Joined: 22 Feb 2018, 21:03
Re: Staveley receiver servo plugs
Thanks Tobe, PM sent.