Staveley receiver servo plugs

Single to Multi propo
Post Reply
AlexC
Posts: 53
Joined: 22 Feb 2018, 21:03

Staveley receiver servo plugs

Post by AlexC »

Are the servo plugs for the Staveley digital 27MHz receiver still available somewhere? They seem to be similar to the old Skyleader ones but with a slightly different pitch.
AlexC
Posts: 53
Joined: 22 Feb 2018, 21:03

Re: Staveley receiver servo plugs

Post by AlexC »

Hi Phil,
2 photos showing receiver socket and plug.
Spacing on the group of 3 is around 1.85mm and 2.9mm for the polarising pin.
20200330_201436.jpg
20200330_201521.jpg
JohnH
Posts: 30
Joined: 18 Jun 2019, 03:48
Location: Eden, MD USA

Re: Staveley receiver servo plugs

Post by JohnH »

The plug and socket look just like the old Kraft plugs.
John H.
"Here's another fine mess you've gotten me into."
Tobe
Posts: 665
Joined: 16 Feb 2018, 06:19
Location: Varberg or Stockholm, Sweden

Re: Staveley receiver servo plugs

Post by Tobe »

I see, I have plenty of Kraft original connectors so PM me with your needs. They are brand new and comes with the leads. Do you need 3 or 4 leads, i.e. with or w/o center tap
Horizon were using the same connectors however the Kraft were crimped to the wire as the Staveley and the Horizon had soldering tabs.
Cheers,

Tobe
AlexC
Posts: 53
Joined: 22 Feb 2018, 21:03

Re: Staveley receiver servo plugs

Post by AlexC »

Thanks Tobe, PM sent.
Post Reply