Hi
On my “to do list” is the Graupner Flip, ever since I saw it in Aeromodeller Jan 1966. This is my rendition of it using modern radio gear... and it’s still heavier than the Fred Militky original. I think he must have been a bit of a wiz...
Graupner Flip
-
- Posts: 50
- Joined: 15 Jun 2017, 18:22
Graupner Flip
Last edited by glyn on 18 Dec 2020, 19:39, edited 2 times in total.
- tiptipflyer
- Posts: 396
- Joined: 16 Feb 2018, 22:49
- Location: Germany
Re: Graupner Flip
Fantastic Glyn,
I had several of those when I was a kid.
Great memorys.
Frank
I had several of those when I was a kid.
Great memorys.
Frank
-
- Posts: 50
- Joined: 15 Jun 2017, 18:22
Re: Graupner Flip
That's nice to hear Frank. I've never seen an original, looks like they were a typical great quality Graupner product. I just couldn't believe how Fred could possibly make radio gear for it ... amazing! I wanted one so much when I was a lad. Fifty four years later I've got one and the servos were only £3.60p each. That's amazing too!
Cheers.
Cheers.
-
- Posts: 671
- Joined: 16 Feb 2018, 06:19
- Location: Varberg or Stockholm, Sweden
Re: Graupner Flip
Very well done Glynn
...mmm
I need to dig in to my micro micro box and see what I have there...if I remember right I should have an original Filp hiding in one of my boxes in the darkest corner of the house.
I had the opportunity in 2002 to play with the first "proportional" magnetic actuator as I designed a few kits for them and we used them with 3 cells NiMh110 mA before we got access to the first LiPo.
...mmm
I need to dig in to my micro micro box and see what I have there...if I remember right I should have an original Filp hiding in one of my boxes in the darkest corner of the house.
I had the opportunity in 2002 to play with the first "proportional" magnetic actuator as I designed a few kits for them and we used them with 3 cells NiMh110 mA before we got access to the first LiPo.
Cheers,
Tobe
Tobe
-
- Posts: 50
- Joined: 15 Jun 2017, 18:22
Re: Graupner Flip
Wow Tobe I’ve got one of those little racers and the magnetic actuators as well. It is a good model. Did you design it? Great flyer.
I can’t remember who made the radio gear... was it Plantanco?
It’s easier to get batteries now I’ll have to give it another go.
Well done if you were involved in the kits...
I can’t remember who made the radio gear... was it Plantanco?
It’s easier to get batteries now I’ll have to give it another go.
Well done if you were involved in the kits...
Last edited by glyn on 28 Dec 2020, 11:43, edited 1 time in total.
-
- Posts: 671
- Joined: 16 Feb 2018, 06:19
- Location: Varberg or Stockholm, Sweden
Re: Graupner Flip
The equipment you see in my pictures were pre-Plantraco...Clerence Hurd's RFFS-100 micro light RC system and was actually running with regular Tx as Plantraco used 433 MHz and made a full system.
When all this and some more happened I lived in Florida and had in my circle of friends many interesting chaps that had in common an experimenting inquisitor and challenging mind. Glynn, you are bringing me to memory lane...in those days I was the young kiddo
At that time, early 2000, I had one of the early laser cutter so I used to to do a lot of prototyping...and so much new things were on it's way in electronic, batteries, electric etc. so it was possible to make smaller models reliable. All this allowed me to even fly R/C with CO2 motors.
I would say that what triggered this evolution was the small Hitech servos and the GWS Rx. In the pictures you are able to see some early Mini/Micro R/C possible not the least of the development of electric motors.
The Spitfire was almost fullhouse...the rudder was coupled to aileron which was a necessity to be be able to control it.
Many of this models like the Spitfire was possible to build thanks that all parts were laser cut as they were so small and cutting by hand would have been almost impossible.
The Shoestring you see in my picture was a beta build and I should have in my hides a few more "beta" builds and originals.
When all this and some more happened I lived in Florida and had in my circle of friends many interesting chaps that had in common an experimenting inquisitor and challenging mind. Glynn, you are bringing me to memory lane...in those days I was the young kiddo
At that time, early 2000, I had one of the early laser cutter so I used to to do a lot of prototyping...and so much new things were on it's way in electronic, batteries, electric etc. so it was possible to make smaller models reliable. All this allowed me to even fly R/C with CO2 motors.
I would say that what triggered this evolution was the small Hitech servos and the GWS Rx. In the pictures you are able to see some early Mini/Micro R/C possible not the least of the development of electric motors.
The Spitfire was almost fullhouse...the rudder was coupled to aileron which was a necessity to be be able to control it.
Many of this models like the Spitfire was possible to build thanks that all parts were laser cut as they were so small and cutting by hand would have been almost impossible.
Cheers,
Tobe
Tobe
- Wayne_H
- Posts: 811
- Joined: 17 Feb 2018, 05:26
- Location: Temora, NSW. Australia
- Contact:
Re: Graupner Flip
Looks like some WesTechnics linear servos and carbon props in there too Tobe? Also spotted a copy of Microflight - I corresponded with a number of their regular contributors when I was writing WIW - Wayne's Indoor World - on the EZone circa 1996 - 2001
Small World!?!
Small World!?!
Cheers,
Wayne
Once a Retrobate, always a Retrobate............
Wayne
Once a Retrobate, always a Retrobate............
-
- Posts: 671
- Joined: 16 Feb 2018, 06:19
- Location: Varberg or Stockholm, Sweden
Re: Graupner Flip
You are right, to what I remember most of the equipment in the Jodel should be WES....but not the prop!
I borrowed some of their carbon fiber props from a friend and made molds for my personsl needs as they were ridiculous expensive.
MicroFlight was a good short lived magazine.
I borrowed some of their carbon fiber props from a friend and made molds for my personsl needs as they were ridiculous expensive.
MicroFlight was a good short lived magazine.
Cheers,
Tobe
Tobe