Page 4 of 4
Re: Pageboy
Posted: 06 Jul 2018, 19:46
by Carl
After watching the video I'm glad mine is running from a 1S lipo
- same motor though
I did a close flyby like yourself Wayne with my Pulstar yesterday and had to duck pretty sharpish when I realized it was coming right at me
Thanks for the video,
Carl
Re: Pageboy
Posted: 06 Jul 2018, 23:35
by _AL_
Looks like a winner.
Al
Re: Pageboy
Posted: 08 Aug 2018, 12:29
by Wayne_H
One last update.
I swapped the 12A ESC for a 6A unit with the brake setting activated, and added more down thrust. I also made up a 260mah 2S pack. Net weight reduction was about 9g or 10%. The rudder throw has also been reduced by about 20%.
Flying performance is now even better, especially the glide. Full power is invigorating but controllable - this morning I even managed a passable(?) immelman, a split S, a loop & a barrel roll
. Being such a small machine, you have to really concentrate on the attitude of the model at all times, or you get disoriented real quick!!
A simple trick I use on these small models to accurately get the CofG right, is to insert a pin into each wingtip at the required CofG location with the pin head protruding about 3mm. Then I can quickly & easily lift the model by the pins to check that I have the model balanced correctly - far more accurate than using your finger tips! If you decide to move the CofG, just relocate the pins accordingly.
- pins inserted into the wingtips at the CG location
Re: Pageboy
Posted: 23 Feb 2019, 15:03
by Carl
My Pageboy now has elevator
I wanted a 1S ESC for my Ponty theme build, so took it from the Pageboy and installed a 2/3S ESC in its place. At the same time thought I'd add an elevator. Original AUW was 80g - now with a small 2S lipo it's a little under 100g. Looking forward to flying it with this configuration
Re: Pageboy
Posted: 22 Mar 2019, 20:55
by Carl
Yesterday I had a quick flight with my Pageboy with it's revised configuration - now with elevator and running 2S. Towards the end of the video clip it started porpoising a little, so I'll move weight a fraction forward. Other than that really happy with how it performed and maybe start doing a few maneuvers with it another time
Re: Pageboy
Posted: 26 Mar 2019, 09:54
by Wayne_H
Re: Pageboy
Posted: 27 Mar 2019, 07:56
by Carl
Looks like a chubby baby
Re: Pageboy
Posted: 27 Mar 2019, 11:46
by Shaun
Cracking job Wayne. Let's have the flight video posted.. That's if you can find it in the sky
Shaun.