So looking out the window this evening there wasn't a breath of wind but it was quite foggy, I decided to give the new sharkface its maiden voyage.
Our Oliver went with me to the club field, no one else was there, perfect for a maiden.
I set the throttle to 50% and give it my usual chuck, its exactly like the original one but smoother in flight.
I managed to get 50 seconds worth of video using my phone, that is not as easy as it looks when your concentrating on flying, opening the phone and putting the password key lock in etc. sorry about the quality, it was only on low res but at least it proves it flys.
Landing was a doddle as usual, lovely flyer.
Very pleased with the results
PS I love our Olivers remarks, Dad your landing it in the wrong place
Not bad for rudder only on the button. TX was Pathfinder
Ron
Maiden flight of the Sharkface 1.5x
- RON
- Site Admin
- Posts: 613
- Joined: 12 Jun 2017, 15:09
- Location: Stokesley North Yorkshire
Maiden flight of the Sharkface 1.5x
G0MBV Class A Radio Amateur, North Yorkshire
- PaulJ
- Posts: 598
- Joined: 16 Feb 2018, 19:01
- Location: Ipswich, UK
Re: Maiden flight of the Sharkface 1.5x
Very nice Ron...... Maiden flights don't come better than that!
- RON
- Site Admin
- Posts: 613
- Joined: 12 Jun 2017, 15:09
- Location: Stokesley North Yorkshire
Re: Maiden flight of the Sharkface 1.5x
Cheers Paul
Yes very happy with it. Half throttle is enough though.
Never tried full.
Just had the one flight as it was quite foggy and you could see it disappear every now and then lol
Ron.
Yes very happy with it. Half throttle is enough though.
Never tried full.
Just had the one flight as it was quite foggy and you could see it disappear every now and then lol
Ron.
G0MBV Class A Radio Amateur, North Yorkshire
- PaulJ
- Posts: 598
- Joined: 16 Feb 2018, 19:01
- Location: Ipswich, UK
- RON
- Site Admin
- Posts: 613
- Joined: 12 Jun 2017, 15:09
- Location: Stokesley North Yorkshire
Re: Maiden flight of the Sharkface 1.5x
Hi Paul
Motor is an overlander T2826 140w. 3s 1300ma. Prop is an APC thin electric 8x4
All of it was just a guess to be honest and all from the scrap box apart from a new 20a controller which I purchased. Seems to be a good combination though
Ron
Motor is an overlander T2826 140w. 3s 1300ma. Prop is an APC thin electric 8x4
All of it was just a guess to be honest and all from the scrap box apart from a new 20a controller which I purchased. Seems to be a good combination though
Ron
G0MBV Class A Radio Amateur, North Yorkshire
- PaulJ
- Posts: 598
- Joined: 16 Feb 2018, 19:01
- Location: Ipswich, UK
Re: Maiden flight of the Sharkface 1.5x
I'm not surprised you only needed half throttle, 140W seems quite a lot........ what does it weigh?
- RON
- Site Admin
- Posts: 613
- Joined: 12 Jun 2017, 15:09
- Location: Stokesley North Yorkshire
Re: Maiden flight of the Sharkface 1.5x
Paul
Just weighed it and it’s 580gramms which is 1.28 lbs
Ron.
Just weighed it and it’s 580gramms which is 1.28 lbs
Ron.
G0MBV Class A Radio Amateur, North Yorkshire
- stuart mackay
- Posts: 501
- Joined: 01 Mar 2018, 10:38
- Location: Swaffham, Norfolk
- Contact:
Re: Maiden flight of the Sharkface 1.5x
Well done Ron, at least your landings are in the same postcode, unlike mine!!