Hi from Germany

Welcome to the Mode Zero Forum
Post Reply
Galileo
Posts: 3
Joined: 23 Sep 2019, 18:36

Hi from Germany

Post by Galileo » 27 Sep 2019, 20:18

Hi guys,

my name is Wolfgang from the south west of Germany. Phil invited me to register here, and I like it!

While searching a PPM board for refurbishing a 50 year old transmitter, I found Phils arduino project, which fits the bill.

User avatar
tiptipflyer
Posts: 206
Joined: 16 Feb 2018, 22:49
Location: Germany

Re: Hi from Germany

Post by tiptipflyer » 28 Sep 2019, 06:32

Hallo Wolfgang, willkommen an Bord

Frank

User avatar
RON
Site Admin
Posts: 552
Joined: 12 Jun 2017, 15:09
Location: Guisborough North Yorkshire

Re: Hi from Germany

Post by RON » 28 Sep 2019, 09:36

Welcome the forum Wolfgang,

Looking forward to seeing your transmitter project..

Ron. (Admin)
If you would like to contribute a small amount toward the upkeep of this valuable forum then please click the Donations link at the top of the page, just below the mode zero logo. All donations are kept anonymous. Thankyou

User avatar
Wayne_H
Posts: 296
Joined: 17 Feb 2018, 05:26
Location: Temora, NSW. Australia
Contact:

Re: Hi from Germany

Post by Wayne_H » 28 Sep 2019, 11:05

Hi Wolfgang,

welcome to Mode Zero ;)

I too look forward to seeing your Tx project
Cheers,

Wayne
Once a Retrobate, always a Retrobate............ :roll:

MaxZ
Posts: 143
Joined: 31 Jan 2019, 11:48
Location: Boskoop, Netherlands

Re: Hi from Germany

Post by MaxZ » 28 Sep 2019, 12:55

Welkom Wolfgang.
We have met briefly on RC-network I believe.
I have learned a lot about Arduino on this forum, thanks to the projects already here when I joined, but also because of the helpfulness of the people here in helping me overcome the hurdles in my projects ( a s/c transmitter and some other stuff, not your transmitter project).
I hope to be able at some point to pass some of that knowledge to you in your transmitter project.

Have fun, cheers,
Max.

Galileo
Posts: 3
Joined: 23 Sep 2019, 18:36

Re: Hi from Germany

Post by Galileo » 28 Sep 2019, 12:57

Thanks to all!

Wolfgang

User avatar
F2B
Posts: 110
Joined: 16 Feb 2018, 11:23
Location: 20 m NE of Amsterdam

Re: Hi from Germany

Post by F2B » 28 Sep 2019, 21:46

Hier noch einen schönen Gruβ aus den Niederlanden! :)
F2B or not to be....

User avatar
Shaun
Posts: 476
Joined: 15 Feb 2018, 21:49
Location: West Yorkshire

Re: Hi from Germany

Post by Shaun » 28 Sep 2019, 22:20

Or for our none German speaking forumites and in my best school boy German.

Here's a greeting from the Netherlands

Somebody put me out of my misery an correctly translate it please.


Cheers,

Shaun.

User avatar
F2B
Posts: 110
Joined: 16 Feb 2018, 11:23
Location: 20 m NE of Amsterdam

Re: Hi from Germany

Post by F2B » 28 Sep 2019, 22:30

Ok, I'll put on some misery repellant. :mrgreen:
It was exactly like you understood.
F2B or not to be....

Galileo
Posts: 3
Joined: 23 Sep 2019, 18:36

Re: Hi from Germany

Post by Galileo » 09 Oct 2019, 01:24

Hi,

thanks again for the friendly welcome greetings.

Today I got ready to go Arduino boards from Phil, thank you Phil!

I will show the results later.

Wolfgang

Post Reply