Hi all
- Bill_L
- Posts: 5
- Joined: 22 Feb 2018, 15:19
Re: Hi all
Greetings from Illinois, USA. Great site and glad I found it! I have one of Phil's SC emulators and have made a period retro transmitter and built a Bill Winter Lightning Bug with Cox 010 to fly when spring comes to our frozen midwest! Thanks for setting up this forum, Best, Bill
-
- Posts: 5
- Joined: 24 Feb 2018, 14:00
- Location: Turin, Italy
Re: Hi all
Greetings to all from Italy.
I really was surprised when I connect myself to the forum.
Hope nothing really bad happend to the old format.
Is it something that will be restored sooner or later or do I have to assume that it"s a new world?
Warm regards to all
Nino
I really was surprised when I connect myself to the forum.
Hope nothing really bad happend to the old format.
Is it something that will be restored sooner or later or do I have to assume that it"s a new world?
Warm regards to all
Nino
- oteru
- Posts: 26
- Joined: 25 Feb 2018, 00:54
- Location: Fukuoka Prefecture Japan
- Contact:
Re: Hi all
will also participate from Japan.
・STX-ST 2: single channel Single stick transmitter
・STX- FJ 2: Single channel transmitter
・SSTX-2MS: 3CH single stick transmitter
・SEC-FJ1 : Single channel encoder
・STX-F1S: Single channel transmitter
・MTX-10F: 10CH multi transmitter
My blog
http://singlechannel.seesaa.net/
oteru
・STX-ST 2: single channel Single stick transmitter
・STX- FJ 2: Single channel transmitter
・SSTX-2MS: 3CH single stick transmitter
・SEC-FJ1 : Single channel encoder
・STX-F1S: Single channel transmitter
・MTX-10F: 10CH multi transmitter
My blog
http://singlechannel.seesaa.net/
oteru
Last edited by oteru on 27 Feb 2018, 05:25, edited 1 time in total.
- RON
- Site Admin
- Posts: 643
- Joined: 12 Jun 2017, 15:09
- Location: Stokesley North Yorkshire
Re: Hi all
Hi Oteru
Great to see you on our new forum.
Very nice job your transmitters as usual.
I like your attention to detail. Always an inspiration.
Ron.
Great to see you on our new forum.
Very nice job your transmitters as usual.
I like your attention to detail. Always an inspiration.
Ron.
G0MBV Class A Radio Amateur, North Yorkshire
-
- Posts: 56
- Joined: 25 Feb 2018, 17:59
Re: Hi all
Hi everyone, took quite a while to figure there was a new forum.
There was some very good content in the other forum, has it been lost for good?
There was some very good content in the other forum, has it been lost for good?
- iflylilplanes
- Posts: 183
- Joined: 13 Mar 2018, 03:26
- Location: Sydney Australia
- Contact:
Re: Hi all
I'm back, came across the link on Shaun and Phil's web site today, I was feeling left out, glad we are back.
Cheers,
Dave
Dave
-
- Posts: 140
- Joined: 21 Mar 2018, 12:43
- Location: Ilkley, UK
Eyup - Imereatlast
Better late than never .... though some may disagree!
-
- Posts: 7
- Joined: 21 May 2018, 22:11
Re: Hi all
Hi all, from down south in sunny Hampshire.
A short history of my single channel antics so far :-
I recently found out my old Macgregor single channel set complete with Conquest escapement and was surprised it all still worked perfectly. After a few successful flights with it on 27MHz someone told me about Phil's module to convert to 2.4GHz.
So, I am now all converted and currently have the following models flying on single channel -
Diamond Demon with Mills 1.3
Electric powered KK Scorpion
2x KK Eaglet with OS10
30" Sharkface with PAW1.49, currently flying on 2 channel, but need to sharpen up my flying skills before trying on s/c.
I have also just finished and flown my Pulstar, but I'll post details of that later on the other thread.
Barry
A short history of my single channel antics so far :-
I recently found out my old Macgregor single channel set complete with Conquest escapement and was surprised it all still worked perfectly. After a few successful flights with it on 27MHz someone told me about Phil's module to convert to 2.4GHz.
So, I am now all converted and currently have the following models flying on single channel -
Diamond Demon with Mills 1.3
Electric powered KK Scorpion
2x KK Eaglet with OS10
30" Sharkface with PAW1.49, currently flying on 2 channel, but need to sharpen up my flying skills before trying on s/c.
I have also just finished and flown my Pulstar, but I'll post details of that later on the other thread.
Barry
-
- Posts: 748
- Joined: 16 Feb 2018, 14:11
- Location: Warwickshire
Re: Hi all
Hi Barry! Welcome aboard!
-
- Posts: 60
- Joined: 18 Feb 2018, 20:14
Re: Hi all
Sounds like you have been busy Barry, are these new builds or resurrected models. Welcome to the forum, I am sure you will love it.
Ade
Ade