Page 1 of 1
Hi from Germany
Posted: 27 Sep 2019, 20:18
by Galileo
Hi guys,
my name is Wolfgang from the south west of Germany. Phil invited me to register here, and I like it!
While searching a PPM board for refurbishing a 50 year old transmitter, I found Phils arduino project, which fits the bill.
Re: Hi from Germany
Posted: 28 Sep 2019, 06:32
by tiptipflyer
Hallo Wolfgang, willkommen an Bord
Frank
Re: Hi from Germany
Posted: 28 Sep 2019, 09:36
by RON
Welcome the forum Wolfgang,
Looking forward to seeing your transmitter project..
Ron. (Admin)
Re: Hi from Germany
Posted: 28 Sep 2019, 11:05
by Wayne_H
Hi Wolfgang,
welcome to Mode Zero
I too look forward to seeing your Tx project
Re: Hi from Germany
Posted: 28 Sep 2019, 12:55
by MaxZ
Welkom Wolfgang.
We have met briefly on RC-network I believe.
I have learned a lot about Arduino on this forum, thanks to the projects already here when I joined, but also because of the helpfulness of the people here in helping me overcome the hurdles in my projects ( a s/c transmitter and some other stuff, not your transmitter project).
I hope to be able at some point to pass some of that knowledge to you in your transmitter project.
Have fun, cheers,
Max.
Re: Hi from Germany
Posted: 28 Sep 2019, 12:57
by Galileo
Thanks to all!
Wolfgang
Re: Hi from Germany
Posted: 28 Sep 2019, 21:46
by F2B
Hier noch einen schönen Gruβ aus den Niederlanden!
Re: Hi from Germany
Posted: 28 Sep 2019, 22:20
by Shaun
Or for our none German speaking forumites and in my best school boy German.
Here's a greeting from the Netherlands
Somebody put me out of my misery an correctly translate it please.
Cheers,
Shaun.
Re: Hi from Germany
Posted: 28 Sep 2019, 22:30
by F2B
Ok, I'll put on some misery repellant.
It was exactly like you understood.
Re: Hi from Germany
Posted: 09 Oct 2019, 01:24
by Galileo
Hi,
thanks again for the friendly welcome greetings.
Today I got ready to go Arduino boards from Phil, thank you Phil!
I will show the results later.
Wolfgang