Spring clearout

Something to sell, buy or swap?
List it here.
Post Reply
User avatar
RON
Site Admin
Posts: 614
Joined: 12 Jun 2017, 15:09
Location: Stokesley North Yorkshire

Spring clearout

Post by RON »

SOLD
Hi Guys
Im having a spring clearout and getting rid of some of my models to make some room.

The first on the list is my S/C Cox powered shark face. This was built from a short kit from Igull. Its virtually ready to fly complete with Cox babe Bee, V8 RX and RX battery and a Savox digital servo. Its a real nice flyer as can be seen in the video below.
I purchased the Babe bee for this model and it's never been in anything else so it's only done half a dozen flights.
It's well built and covered in red solorfilm.
£70 complete, Perfect for Ponty.
Please note NO TRANSMITTER

I'm sorting stuff out so watch out for other stuff.
IMG_0219.jpg
G0MBV Class A Radio Amateur, North Yorkshire
User avatar
RON
Site Admin
Posts: 614
Joined: 12 Jun 2017, 15:09
Location: Stokesley North Yorkshire

Re: Spring clearout

Post by RON »

Sharkface now sold. thanks
G0MBV Class A Radio Amateur, North Yorkshire
User avatar
RON
Site Admin
Posts: 614
Joined: 12 Jun 2017, 15:09
Location: Stokesley North Yorkshire

Re: Spring clearout

Post by RON »

SOLD

Next model to go is the vintage Little V slope soarer, 1969 design
This is a vtail sloper around 38 inch span,
Very nice flyer on just 2 channels. Rudder elevator. see video

Here are photos with power pod attached,
I'll sell it with or without the pod.
Pod is an almost brand new Cox black bee .049. Only used on this model.
Its almost ready to fly, 2 hitec servos, Frsky RX and ~RX battery pack 4.8v LSD cells
NO TRANSMITTER
Covered in Solortex. Nice strong model.
£60 without the pod £80 with it.
The covering alone on this model cost nearly £30

IMG_1158.jpg
IMG_0159.jpg


G0MBV Class A Radio Amateur, North Yorkshire
User avatar
RON
Site Admin
Posts: 614
Joined: 12 Jun 2017, 15:09
Location: Stokesley North Yorkshire

Re: Spring clearout

Post by RON »

6 Channel Reedy 6
SOLD
Here is my 6 channel reedy6 transmitter for sale, Its surplus to requirements now.
It has all sorts of functions, Oled display, model memories, servo reversing, battery voltage readout, telemetry,
Charging socket on rear, D/V series RX switch on top, Motor cut switch, channel position monitor display, Channel uS display, channel mixing, end points, trim range etc etc
Based on martins encoder.
This was the transmitter I flew the infamous blunderbird at ponty last year and won the pylon race.
It has a nice solid feel to it.

Open to offers, Just DM me
IMG_1253.jpg
IMG_1303.jpg
IMG_1301.jpg
SOLD
G0MBV Class A Radio Amateur, North Yorkshire
Post Reply