Page 1 of 1
RedFin 099 MK I TBR RVTwinFin
Posted: 29 Apr 2018, 09:59
by jackdaw
Re: RedFin 099 MK I TBR RVTwinFin
Posted: 04 Apr 2019, 22:11
by MickC
Hi,
Perhaps a bit late and perhaps the question is now out of date, but I have recently bought one of these. It runs fine - it's a twin ball race motor with reed valves. I received strict instructions to start it with the carb pointing down so it doesn't flood and break the crank or a rod. Also instructions to back off the trailing cylinder comp and start on one cylinder, When it fires up - and it runs okay on one - wind the comp up. I then back off both screws, one at a time, until it misfires and then screw them in a touch. The motor is well behaved and ran well on a 7x5 wood which was the nearest I had at the time. It improved after about half an hour of running. I've not used it since...
Cheers,
Mick.
Re: RedFin 099 MK I TBR RVTwinFin
Posted: 04 Apr 2019, 23:31
by Shaun
Aeromodelling porn
Shaun