Diesel engine STL

Post Reply
AlexC
Posts: 20
Joined: 22 Feb 2018, 21:03

Diesel engine STL

Post by AlexC » 18 Apr 2020, 17:17

I have been searching for a Diesel engine STL file to print, the only one I have managed to find was a cutaway version.
Anyone know of any other designs?

User avatar
tiptipflyer
Posts: 258
Joined: 16 Feb 2018, 22:49
Location: Germany

Re: Diesel engine STL

Post by tiptipflyer » 19 Apr 2020, 05:44

Hi Alex,
I made several diesel engine cylinder heads for 3D print. Taifun Hobby, Hurrikan,Tornado and Mills.
They are printed in two halfes, then glued together, painted in the appropriate color and make real nice dummy engines.
The compression screw is made of a M3 screw with a piece of wire soldered on top.
In the zip. file you find both stl. files and OPENscad files.
Electra9.JPG
Kapitän8.JPG
Taifun2.png
Taifun.png
Mills.zip
(119.69 KiB) Downloaded 34 times
Taifun.zip
(224.67 KiB) Downloaded 35 times
I hope, that is what you need.
Frank
Last edited by tiptipflyer on 19 Apr 2020, 08:56, edited 1 time in total.

WernerL
Posts: 16
Joined: 22 Jan 2020, 02:30

Re: Diesel engine STL

Post by WernerL » 19 Apr 2020, 06:28

Wow, they are sweet! Thanks for sharing!

greetings from Singapore, Werner

User avatar
Wayne_H
Posts: 399
Joined: 17 Feb 2018, 05:26
Location: Temora, NSW. Australia
Contact:

Re: Diesel engine STL

Post by Wayne_H » 19 Apr 2020, 11:18

Love your work Frank!!

Thanks for sharing mate ;)
Cheers,

Wayne
Once a Retrobate, always a Retrobate............ ;)

AlexC
Posts: 20
Joined: 22 Feb 2018, 21:03

Re: Diesel engine STL

Post by AlexC » 19 Apr 2020, 12:39

Thanks Frank,

I will print them up.

Alex.

AlexC
Posts: 20
Joined: 22 Feb 2018, 21:03

Re: Diesel engine STL

Post by AlexC » 17 May 2020, 13:07

John IIsley, One of the lads on another Facebook page kindly uploaded this Mills .75 STL file he designed.
mills-.75.jpg
Attachments
55mm mills.75.stl
(959.26 KiB) Downloaded 11 times

AlexC
Posts: 20
Joined: 22 Feb 2018, 21:03

Re: Diesel engine STL

Post by AlexC » 17 May 2020, 22:59

I have attached another 2 files. These should cover a motor of 18mm diameter as in the photo.
Attachments
tom 2.stl
(1.3 MiB) Downloaded 15 times
TOM mills.stl
(1.21 MiB) Downloaded 9 times

Post Reply