Arduino IDE questions

Arduino projects on the go
Post Reply
jmendoza
Posts: 167
Joined: 18 Feb 2018, 23:07

Arduino IDE questions

Post by jmendoza »

I have Arduino 1.8.11 IDE loaded, works fine and I can program ATMeag 328P controllers (Pro Mini Strong 5V 16MHz boards),

But why can I not find the ATTiny85 or Digispark boards in the tools section?

I did try to upload Arduino 1.6.4, but it wiped out my older version of the Aerduino IDE (1.8.5) and replaced it with 1.6.4. That version uploaded, and installed but will not run...I just get the first page which says "initializing.." and then it closes the page and nothing happens. Oddly it also says the version is 1.6.0, not 1.6.4, which is also troubling, even though the icon for the file says 1.6.4.
Tobe
Posts: 665
Joined: 16 Feb 2018, 06:19
Location: Varberg or Stockholm, Sweden

Re: Arduino IDE questions

Post by Tobe »

See my email for the instructions.
Cheers,

Tobe
jmendoza
Posts: 167
Joined: 18 Feb 2018, 23:07

Re: Arduino IDE questions

Post by jmendoza »

Thanks Tobe, all good now you are the best!
Jay
Post Reply