Reset on ATtiny85

Arduino projects on the go
Post Reply
MaxZ
Posts: 143
Joined: 31 Jan 2019, 11:48
Location: Boskoop, Netherlands

Reset on ATtiny85

Post by MaxZ » 04 Aug 2019, 09:33

I am setting up an ATtiny85 as a servo reverser, using Vero strip board to connect the wires. Because of the layout it would suit me best to connect the reset pin to Vcc (after programming of course). Is there any detrimental effect in doing so? An alternative would be to cut the pin short and not solder it to the board.

Cheers,
Max.

User avatar
Phil_G
Posts: 302
Joined: 15 Feb 2018, 23:32
Contact:

Re: Reset on ATtiny85

Post by Phil_G » 04 Aug 2019, 09:56

Yes that will be fine Max

Post Reply