building 2.4 transmitter using Macgregor Codamac

Button pushers
Post Reply
frogeye61
Posts: 4
Joined: 18 Feb 2021, 12:13
Location: london

building 2.4 transmitter using Macgregor Codamac

Post by frogeye61 »

Hi

Advice please.

I would like to convert my 27mhz Codamac to 2.4ghz. I am NOT an electronics wizard at all. I assume I will need a new receiver and a servo ( I gather the Elmic escapements are not reliable enough now) Again what would be recommended. What sort of battery will I need(I used to use AA batteries before!).What is recommended and who is the best supplier. I have a Tomboy in mind as the airframe powered by an AM10 or 15.

Many thanks
Post Reply