Mode Zero

Here is my RCS replica Single channel Transmitter

This has been built with Phil Greens encoder and a FrSky XHT 11 R/F module and V8 receiver.

Many thanks to Phil Green, Roger Macey and those members on the Forum who answered my questions and gave guidance

I for got to add, I made a frame for the binding board and mounted it on the inside of the TX behind a celluloid window with a small hole to allow access to the switch.

Nice job!
Where did you get/ how did you make the RCS logo?

Hello - It was made by Roger Macey, he has posted his RCS TX and how it was made, It is a few postings below mine. From his posting I have copied the relevant paragraph.

The RCS Badge was created originally in 2D (*.SVG format) using Microsoft Excel Insert Shapes, and working from whatever old pictures I could find, then converted online into 3D (*.STL format) using Selva3D, and finally printed on my “toy” Da Vinci Mini 3D Printer, followed by a little sanding here and there. I know it’s not 100% true to the original badge, but looks OK from a distance !

The GUIDANCE SYSTEM was from a local specalist print company, it was lazer cut and the letters pressed out. - Fun sticking them on

I too want to add my congratulations! Is the .stl file for the RCS badge available anywhere or would Roger Macey allow you put it on this forum?

Paul

I posted the stl. file of my RCS badge I made some time ago in the 3D print section.
viewtopic.php?f=72&t=1215&p=10271#p10271
Frank

stuart mackay wrote: ↑05 Feb 2021, 22:28 viewtopic.php?f=64&t=1224&sid=b8988147a ... eeaf2338a8

Here is a before and after, as you can see I had a sticker based on the files on the forum and compared to the 3D badge, there is a noticeable difference in the overall effect of the Tx.