Im looking for an aerial for a O S pixie {transmitter}
-
- Posts: 5
- Joined: 10 Feb 2021, 16:21
Im looking for an aerial for a O S pixie {transmitter}
Hello. i wonder if anyone can help me? im looking for an aerial for a O.S. Pixie transmitter. must be good condition, cash waiting
- iflylilplanes
- Posts: 182
- Joined: 13 Mar 2018, 03:26
- Location: Sydney Australia
- Contact:
Re: Im looking for an aerial for a O S pixie {transmitter}
I have a spare load somewhere and maybe a part of the antenna as well, have to have a look when I get home tonight.
What part of the world are you?
Dave
What part of the world are you?
Dave
Cheers,
Dave
Dave
-
- Posts: 5
- Joined: 10 Feb 2021, 16:21
Re: Im looking for an aerial for a O S pixie {transmitter}
Hi Dave. ok thanks
-
- Posts: 5
- Joined: 10 Feb 2021, 16:21
Re: Im looking for an aerial for a O S pixie {transmitter}
HI Dave im in Wales UK. dont mind paying for postage
- iflylilplanes
- Posts: 182
- Joined: 13 Mar 2018, 03:26
- Location: Sydney Australia
- Contact:
Re: Im looking for an aerial for a O S pixie {transmitter}
I'll dig them out over the weekend, PM you on Monday.
Dave
Dave
Cheers,
Dave
Dave
- iflylilplanes
- Posts: 182
- Joined: 13 Mar 2018, 03:26
- Location: Sydney Australia
- Contact:
Re: Im looking for an aerial for a O S pixie {transmitter}
Found it, full lower antenna, centre load and the thread with 1mm of the upper antenna.
PM waiting for you.
Dave
PM waiting for you.
Dave
Cheers,
Dave
Dave
- PaulJ
- Posts: 598
- Joined: 16 Feb 2018, 19:01
- Location: Ipswich, UK
Re: Im looking for an aerial for a O S pixie {transmitter}
Dave,
I am currently making a "Pixie Lookalike" using Mike K's 3D files and I would like to finish it off with an antenna that looks alike too. So before sending it off to Doug, please would you take a picture of the loading coil and post it on here with dimensions..... length/diameter.
Paul
I am currently making a "Pixie Lookalike" using Mike K's 3D files and I would like to finish it off with an antenna that looks alike too. So before sending it off to Doug, please would you take a picture of the loading coil and post it on here with dimensions..... length/diameter.
Paul
- Mike_K
- Posts: 669
- Joined: 16 Feb 2018, 06:35
- Location: Hertfordshire
Re: Im looking for an aerial for a O S pixie {transmitter}
Hi Paul
Since I've got an OS Pixie sitting on the shelf next to me, I'll save Dave.
As you can see, there is a raised section around the middle, either side of it is 18.7mm diameter. It isn't quite symmetrical, the bottom has a bigger hole than the top, but for a reproduction, I would keep it simple.
Cheers
Mike
Since I've got an OS Pixie sitting on the shelf next to me, I'll save Dave.
As you can see, there is a raised section around the middle, either side of it is 18.7mm diameter. It isn't quite symmetrical, the bottom has a bigger hole than the top, but for a reproduction, I would keep it simple.
Cheers
Mike
- PaulJ
- Posts: 598
- Joined: 16 Feb 2018, 19:01
- Location: Ipswich, UK
Re: Im looking for an aerial for a O S pixie {transmitter}
Many thanks Mike......... I don't have any green filament but there is a Pixie on ebay at the moment with a black loading coil so mine will be a repro of the black version! I will post pictures once it is finished but at the moment I am having trouble squeezing in all the electrickery!
Paul
Paul
- iflylilplanes
- Posts: 182
- Joined: 13 Mar 2018, 03:26
- Location: Sydney Australia
- Contact: