Staveley Tone Lock conversion
Posted: 04 Jun 2021, 14:04
Just converted this for Andy Boddo. It was Dave Boddo's originally.
Used one of Phil's propo encoders I had lying around. Replaced push button on the tx with a pot for the throttle, the coder switch was retained and wired with fixed resistors for rudder and added an internal pot for the rates.
Used an Orange Rx hack module for the RF.
Range on low power is over twice the stated range in the manual.
Shaun
Used one of Phil's propo encoders I had lying around. Replaced push button on the tx with a pot for the throttle, the coder switch was retained and wired with fixed resistors for rudder and added an internal pot for the rates.
Used an Orange Rx hack module for the RF.
Range on low power is over twice the stated range in the manual.
Shaun