Macgregor MR200 Conversion to 2.4Ghz
Posted: 06 Oct 2023, 16:34
Just finished converting my Macgregor MR200 transmitter to 2.4ghz, using one of Phil's single channel encoders and a Lemon 2.4ghz module. Just a morning's work, as I left the internals as is just disconnected the various leads and added the encoder, module and a 2s1p 450mah Lipo as power. Even easier than the Digimac 1+1 that I finished yesterday.
Ideally I'd have liked to not have to drill the two wee spyholes in the front of the transmitter to see the LEDs, I guess with a bit of extra work I could have worked it so that they were on the top of the transmitter case, but I hope that they don't jar too much and it's handy to have them visible. Still putting some images in rotated, no matter what I do to them.
....no biggie! I edit the pics in my Android and for some reason they comes correct, Cheers
Ideally I'd have liked to not have to drill the two wee spyholes in the front of the transmitter to see the LEDs, I guess with a bit of extra work I could have worked it so that they were on the top of the transmitter case, but I hope that they don't jar too much and it's handy to have them visible. Still putting some images in rotated, no matter what I do to them.
....no biggie! I edit the pics in my Android and for some reason they comes correct, Cheers