Controlaire Galloping Ghost 2.4GHz conversion is complete

[ncpiperpilot]

Just finished my Controlaire GG Tx conversion, all is working great!

The project worked on first power up...only thing wrong is that I had the control throw adjustment pots wired backwards. Had to fix that so when i turn the pot clockwise, throw increases. I'll still go back and tidy up the wiring, but happy all is working!

I used Phil_G's GG encoder, and a Lemon Tx module. On the receiving end is a Tobe GG actuator. The throw is all adjusted and now ready to install in something. I have a foam Sureflite 1/2A kit that will be a good testbed with minimal construction requirements and it I guess I will use that.

Cheers,
Bill