Another Mattel transmitter conversion.

Waggly tails
Post Reply
ChrisBe
Posts: 13
Joined: 16 Feb 2019, 06:49

Another Mattel transmitter conversion.

Post by ChrisBe »

Finally got my Mattel transmitter conversion completed. Used Phil G Digimac 1+1. FYI the Mattel stick pot is 170K ohms! Had to put a 1Meg ohm resistor across the pot, a 100 ohm resistor on the ccw lead and a second 100 ohm resistor on the cw lead of the pot to get the system to work. Very pleased with the results. Nice! Also added one of Phil's pulsers with a 100 ohm resistor inline to an Adams actuator. It all works nicely. Now I've got throttle and a waggly tail! Now do I put in a School Master or a Jr. Falcon? Decisions.....

15852462837751224339590.jpg
1585246925551-340256299.jpg
1585246516568-601128687.jpg
jmendoza
Posts: 167
Joined: 18 Feb 2018, 23:07

Re: Another Mattel transmitter conversion.

Post by jmendoza »

Nice! My vote is for the Jr Falcon,
Jay
ChrisBe
Posts: 13
Joined: 16 Feb 2019, 06:49

Re: Another Mattel transmitter conversion.

Post by ChrisBe »

:D Thanks Jay! Good hearing from you and appreciate the input. More projects like this in the works.
Post Reply