F&M Reed systems
- stuart mackay
- Posts: 524
- Joined: 01 Mar 2018, 10:38
- Location: Swaffham, Norfolk
- Contact:
Re: F&M Reed systems
Ken do you mean like this recent acquisition and scheduled for a phil_g reeduino encoder
-
- Posts: 15
- Joined: 14 Mar 2019, 18:56
Re: F&M Reed systems
Yes that’s the one I was making my own Reed equipment (remcon) as a 14year old and Chris Olsen who was local to me took me under his wing. I witnessed the test flying of his Uplift model with a twin plug merco engine prior to the last worlds that he used reeds against most pilots using propo.
Just the feel of the switches on the matador was superb. At the time we used to listen in’ using a monitor for the tones that the pilot used as he was controlling the aircraft. In Chris’s case particularly he was pulsing at a very high rate. The transmite servos were slow and could be held almost stationary in a mid travel position to fly larger loops for example. The F&M transmitter has a superb feel making the above possible.
Just the feel of the switches on the matador was superb. At the time we used to listen in’ using a monitor for the tones that the pilot used as he was controlling the aircraft. In Chris’s case particularly he was pulsing at a very high rate. The transmite servos were slow and could be held almost stationary in a mid travel position to fly larger loops for example. The F&M transmitter has a superb feel making the above possible.
- Phil_G
- Posts: 625
- Joined: 15 Feb 2018, 23:32
- Contact:
Re: F&M Reed systems
Yes the Switchcraft toggles used by F&M, Orbit etc were (are still) a world away from Remcons click-clack car-window switches!!! On the other hand, if you're flying a Remcon, everyone knows and will come over for a chat, if only to say "what on earth is that racket?"
-
- Posts: 15
- Joined: 14 Mar 2019, 18:56
Re: F&M Reed systems
Oh no Phil you’ve even got a Tauri as well. After the Suzy Que on reeds with Remcon before the Digithree with AMT I used a an RCS super Regen multi receiver in my Tauri. At the the Golden Cross Rally of the year Olsen, Van den Burg flew superhet reeds in the pylon racing event. As I only had super regen I was allowed to race on my own against the stopwatch with Frank Van den burg as my caller. HOW COOL was that. Son of a working family flying with people that could AFFORD F&M, orbit Kraft etc
-
- Posts: 15
- Joined: 14 Mar 2019, 18:56
Re: F&M Reed systems
Thanks for replying Stuart. Superb set
- Shaun
- Posts: 1070
- Joined: 15 Feb 2018, 21:49
- Location: West Yorkshire
Re: F&M Reed systems
Ken,
You must have one more great Slope Soarer design in you.
If you design one, I'll do the article
Shaun
You must have one more great Slope Soarer design in you.
If you design one, I'll do the article
Shaun
-
- Posts: 15
- Joined: 14 Mar 2019, 18:56
Re: F&M Reed systems
You could always build Suzy Que mk5. Plans available
- Shaun
- Posts: 1070
- Joined: 15 Feb 2018, 21:49
- Location: West Yorkshire
Re: F&M Reed systems
How about a Mk6
-
- Posts: 15
- Joined: 14 Mar 2019, 18:56
Re: F&M Reed systems
Link below has lots of info on F&M Matador incl instructions and manual. Look at picture pages!! Never realised there were so many manufacturers
Mhttps://www.vintagercfiles.com/
Mhttps://www.vintagercfiles.com/