The converted TX:
An early Citizenship 3 channel analogue TX converted to 2.4ghz
-
ozrs
- Posts: 114
- Joined: 16 Feb 2018, 15:21
- Location: West Australia
An early Citizenship 3 channel analogue TX converted to 2.4ghz
Some pics of my converted CitizenShip set. Most were posted on previous forum, but original description has been lost - so just some brief comments (from memory).
The converted TX: original internals: converted internals - the original pcb was cut down and used as a brace for the stick units. Uses a Futaba 4ch encoder from an 'Attack 4' (conversion predates availability of Phil's encoder) and a Frsky module. The original 'reeds' type switch replaced with a conventional toggle to give an on/off function:
The converted TX: original internals: converted internals - the original pcb was cut down and used as a brace for the stick units. Uses a Futaba 4ch encoder from an 'Attack 4' (conversion predates availability of Phil's encoder) and a Frsky module. The original 'reeds' type switch replaced with a conventional toggle to give an on/off function:
Richard
-
ozrs
- Posts: 114
- Joined: 16 Feb 2018, 15:21
- Location: West Australia
Re: An early Citizenship 3 channel analogue TX converted to 2.4ghz
this pic (found online) shows the actual aftermarket sticks:
Richard