MiTo R/C Set (Mike - Tobe)

[leccyflyer]

Superb - you should be approaching JCB to see if they want any of their big diggers converting to 2.4Ghz with that colour scheme. Looks proper bonny.

[Shaun]

How did you know that.

Many years ago I was involved consulting on a project for JCB . We converted one making it the biggest FPV, radio controlled toy in the world; yup...no driver on board.
I have to say I was slightly concerned as it trundled past all the directors very expensive cars but it worked.. phew... Proof of concept proved.

Shaun

[Tobe]

MiTo system has now been updated to a full blown up 8 channels system with the new Rx, you might remember that the first one was introduced with my 6 channels Rx.
This 8ch Rx will run down to 1s, the servos runs on +Batt so 2s servos are no issues as to run from 5 NiMh or 2 LiFe which was not possible with my earlier Rx as this one it has both voltage regulator as reverse polarity protection.
It uses a nRF24L01 module that has PA and a pass band filter to guarantee maximum range.
The pin header 3+3+2 (spacing between each group of pin headers to facilitate installation/removal of each servo lead)

The Rx is 26 x 27 mm full 8 channels

...and if it's not on you YouTube it doesn't exist so here it is

.....I know it's a poor video but one-handed I can't do better!

[Shaun]

Excellent work pal..

[Wayne_H]

Most impressive Mr T (& Mr K??)

[Al Clark]

Very impressive! Love that small RX. And those little servos are great too. Most amazing scratch built radio I've ever seen!

[Tobe]

...Mr T & Mr K and Mr Phil_G

Cheers Wayne

Tobe

[Wayne_H]

Oops
You are of course absolutely correct Tobe. My personal thanks to Phil for sharing his original code which has empowered me to learn new tricks and return a bunch of Tx's to active service, all gear that I coveted in magazines I poured over as a youth.