Mini two channel propo

Single to Multi propo
Post Reply
User avatar
Phil_G
Posts: 597
Joined: 15 Feb 2018, 23:32
Contact:

Mini two channel propo

Post by Phil_G »

This set has been hanging around unfinished on my bench for (I can hardly believe) seven years!
Its such a long time I had to prove it to myself by finding the RS invoice for the case (583-094) bought in 2012! The idea was that a really small 2 channel set would be great for slope soaring, but then theres always been something else to do. So I decided to finish it at last!

IMG_20190422_171956_202.JPG
IMG_20190422_172151_558.JPG

Its a 2+1, propo rudder & elevator, digital trims plus sequential throttle, and has two elevon mixer options, channels 5 & 6 are permanent elevon channels, so in a flying wing I'd use channels 5 & 6 and in a rudder-elevator glider 1 & 2. Theres also a link option for elevon on ch1 & 2 just in case its only a 4ch receiver.
Inside its really cramped, as the stick unit takes up most of the space. It uses a Frsky DHT (without the bind board), a DigiSpark and a PP3 2S lithium. The size is somewhere between the Micro-2 and the Horizon 2, but it should be more 'flyable' than the Micro-2 as it has a proper Futaba stick unit. Its unflown as yet but I'm sure it will be fine, there's nothing new in it :D It does need a badge!

IMG_20190422_175832_122.JPG
Gratutious butt shot... :lol:
IMG_20190422_182413_226.JPG


Here are some pics of the case preparation, dated November 2012!
The round hole was cut with a stationery compass used backwards as a scraper (Neil's idea!)
which took a while but gave a very neat hole:


IMG_3646.JPG

IMG_3647.JPG

IMG_3650.JPG

mini2b.jpg


Now somewhere, if I can't find it, I have an Alula kit...

Cheers
Phil
NeilMac
Posts: 165
Joined: 04 Feb 2019, 22:07
Location: Nth Somerset

Re: Mini two channel propo

Post by NeilMac »

That looks great, and as shown in your photo, it is just the right size for me to slip into my back pocket, and then sit on, having almost instantly forgotten where I have put it.
"I'm your huckleberry, that's just my game"
jmendoza
Posts: 167
Joined: 18 Feb 2018, 23:07

Re: Mini two channel propo

Post by jmendoza »

Wow Phil, perfect for gliders,
especially flying wings with micro 4 channel (AR400) receivers.

Sounds idea for my Alula,
or my DAW Me 163a Komet.

Can you post the sketch?

[Phil: its the standard 2+1 sketch Jay, posted here and on www.singlechannel.co.uk]
Post Reply