This model languished in my attic for a number of years. But thanks to the lockdown is nearing completion. Originally built for a small diesel but have made a mount to take a small motor.
New model- Envoy
- Wayne_H
- Posts: 811
- Joined: 17 Feb 2018, 05:26
- Location: Temora, NSW. Australia
- Contact:
Re: New model- Envoy
Looks good Alex. What R/C system are you intending to use - GG, S/C, Reeds or propo?
(spoilt for choice thanks to the brainiacs on this forum )
(spoilt for choice thanks to the brainiacs on this forum )
Cheers,
Wayne
Once a Retrobate, always a Retrobate............
Wayne
Once a Retrobate, always a Retrobate............
-
- Posts: 53
- Joined: 22 Feb 2018, 21:03
Re: New model- Envoy
I'll probably fly it initially propo using my Sprengbrook or Futaba M to get it trimmed etc. Either transmitter will then allow me to fly on the button. As you say, thanks to the very clever people on this forum
-
- Posts: 53
- Joined: 22 Feb 2018, 21:03
Re: New model- Envoy
All Ready, just need some decent weather for the maiden flight.
- PaulJ
- Posts: 603
- Joined: 16 Feb 2018, 19:01
- Location: Ipswich, UK
Re: New model- Envoy
'Lovely job Alex...... What is the covering?
Paul
Paul
-
- Posts: 44
- Joined: 01 Feb 2019, 11:19
- Location: Harderwijk, The Netherlands
Re: New model- Envoy
Sleek lines, Very nice model.
-
- Posts: 53
- Joined: 22 Feb 2018, 21:03
Re: New model- Envoy
Hi Paul,
The model was covered in Solarfilm Litespan and given a couple of coats of clear dope.
The weather was kind to us today and she had her maiden flight and it flew well if perhaps a little tail-heavy.
The model was covered in Solarfilm Litespan and given a couple of coats of clear dope.
The weather was kind to us today and she had her maiden flight and it flew well if perhaps a little tail-heavy.