Hi
My name is Al Clark
i’ve been a modeler since 1959 when I was 7 years old. Started out with ukies, did a bit of freeflight, and got my first radio when I was 19. It was a GG radio set by Ace R/C. Always worked on the bench but always quit in the air, so I replaced it with an Ace R/C Pulse Proportional R/C radio with an Adams actuator and had success with that. Later my first digital proportional radio was a Kraft 2 channel brick set.
I’ve designed, built, and flown a lot of stuff over the years, from 1/8A up to 1/3 scale gas powered stuff. I flew 1/2A and smaller stuff extensively in my early years. I‘ve run RC cars and racing boats. I’ve raced pylon. I used to be the company demo pilot for a short-lived RC helicopter company. I competed heavily with RC sailplanes for years. I’ve been designing, building, and flying giant scale aerotowed sailplanes for the last 9 years. I fly DLG sailplanes. I like electric powered models and have many, from UMX stuff through EDF jets.
I have a soft spot for small R/O and 3 channel models. Recently I got interested in GG again after Tobe Kallner came out with his actuator, Phil G came out with his recoders, and Jay Mendoza began converting old radios to 2.4 GHz. I recently designed a GG model (named “Fidget”) around the Tobe GG actuator and had Jay Mendoza convert an old Orbit TX to 2.4 GHz for me to fly it with. Tobe Kallner just finished building a Fidget. That model will be coming out as a construction article in the AMA Model Aviation Magazine.
I am a Contest Director. I’ve been President of two model clubs, Vice President of one, and Treasurer of another club. I’ve started two model clubs. I’m currently the Newsletter Editor for one of our local RC clubs.
I still own my old Ace R/C Pulse Proportional radio and have 3 receivers for it and various Adams actuators – it all still works.
Looking forward to reading and posting on your Forum.
Regards,
Al Clark
New Member
- Wayne_H
- Posts: 811
- Joined: 17 Feb 2018, 05:26
- Location: Temora, NSW. Australia
- Contact:
Re: New Member
Hi Al,
Welcome to the forum How about posting a few pics of your Fidget?
Welcome to the forum How about posting a few pics of your Fidget?
Cheers,
Wayne
Once a Retrobate, always a Retrobate............
Wayne
Once a Retrobate, always a Retrobate............
- PaulJ
- Posts: 602
- Joined: 16 Feb 2018, 19:01
- Location: Ipswich, UK
Re: New Member
Welcome Al........ Not that it matters but........ where on the globe are you?
Plea to everyone...... Please fill in the bit of your info that says where you are!
Paul
Plea to everyone...... Please fill in the bit of your info that says where you are!
Paul
- RON
- Site Admin
- Posts: 632
- Joined: 12 Jun 2017, 15:09
- Location: Stokesley North Yorkshire
-
- Posts: 667
- Joined: 16 Feb 2018, 06:19
- Location: Varberg or Stockholm, Sweden
Re: New Member
Good to see your here at last Al
...I did I did I did I did
An impressive little machine, nicely designed, easy and fast built and on top a good flyer.
...I did I did I did I did
An impressive little machine, nicely designed, easy and fast built and on top a good flyer.
Cheers,
Tobe
Tobe
-
- Posts: 140
- Joined: 21 Mar 2018, 12:43
- Location: Ilkley, UK