Internal potentiometers for rates and expo
Posted: 23 Aug 2023, 06:52
I'm about to start the conversion to 2.4ghz of a couple of Macgregor Digimac III and IV transmitters, so getting together what I need. I have a very basic question.
Originally I wasn't going to bother with rates or exponential, but now I think I'd like to have them internal to the transmitter, rather than on a switch. Never having done anything remotely like this before I was wondering if someone could point me to a suitable potentiometer to do the job. I've found the info on recommended nice tactile switch for the single channel button, so am putting together a wee order for RS to supply. If some kind soul could let me have an RS part number that would be really appreciated.
Originally I wasn't going to bother with rates or exponential, but now I think I'd like to have them internal to the transmitter, rather than on a switch. Never having done anything remotely like this before I was wondering if someone could point me to a suitable potentiometer to do the job. I've found the info on recommended nice tactile switch for the single channel button, so am putting together a wee order for RS to supply. If some kind soul could let me have an RS part number that would be really appreciated.