Sorry guys,
Im just a fan of the transparent films, Oralite easily been the best. Think the yellow would look good
Ron
Been in't workshop
- RON
- Site Admin
- Posts: 643
- Joined: 12 Jun 2017, 15:09
- Location: Stokesley North Yorkshire
Re: Been in't workshop
G0MBV Class A Radio Amateur, North Yorkshire
-
- Posts: 498
- Joined: 02 Mar 2018, 10:21
- Location: Staindrop, Darlington.
Re: Been in't workshop
I've never used film, it seems very popular in the antipodes and the states. I don't think id ever be confident enough with my building standard to show it off to the wider world outside of you guys!
Very nice Ron. Looks a nice design that one. Bill Dean?
Very nice Ron. Looks a nice design that one. Bill Dean?
- RON
- Site Admin
- Posts: 643
- Joined: 12 Jun 2017, 15:09
- Location: Stokesley North Yorkshire
Re: Been in't workshop
I think it was Albert E Hatful Stew. Here’s a video of the maiden
Ron
Ron
G0MBV Class A Radio Amateur, North Yorkshire
-
- Posts: 284
- Joined: 15 Feb 2018, 23:12
Re: Been in't workshop
The Keil kraft invader was the first design Albert Hatfull submitted to Eddie Keil at the tender age of 17 years old.
-
- Posts: 498
- Joined: 02 Mar 2018, 10:21
- Location: Staindrop, Darlington.
Re: Been in't workshop
Good grief, at 17 I didn't know rat s**t from rice crispies!
Stew.
Stew.
-
- Posts: 498
- Joined: 02 Mar 2018, 10:21
- Location: Staindrop, Darlington.
Re: Been in't workshop
3/4 covered Titch's wing, and run out of red Esaki! Don't you just hate it when that happens.
Also, curved wing tips Gaaaah! Managed, but what a fanny on!
Also, curved wing tips Gaaaah! Managed, but what a fanny on!
- Sundancer
- Posts: 122
- Joined: 07 Jun 2018, 09:28
- Location: Limousin, France
- _AL_
- Posts: 163
- Joined: 17 Feb 2018, 01:09
- Location: Sydney Australia
Re: Been in't workshop
I'm not sure how I missed this one. Looks fantastic Ron.
Al
Al
-
- Posts: 498
- Joined: 02 Mar 2018, 10:21
- Location: Staindrop, Darlington.
Re: Been in't workshop
Well that's the Titch 99% done.
Didn't enjoy that one little bit. Sorry Mr Warring. Way too fiddly for what it is.
My BMFA number will be going on the white section on the wing where I ran out of enough Red Esaki to do the whole panel...
I don't have any small diesels so probably a KP01 up front. There's no DT so I probably won't have it long.
Stew.
Didn't enjoy that one little bit. Sorry Mr Warring. Way too fiddly for what it is.
My BMFA number will be going on the white section on the wing where I ran out of enough Red Esaki to do the whole panel...
I don't have any small diesels so probably a KP01 up front. There's no DT so I probably won't have it long.
Stew.
- Wayne_H
- Posts: 811
- Joined: 17 Feb 2018, 05:26
- Location: Temora, NSW. Australia
- Contact:
Re: Been in't workshop
Lovely work Stew
But, no DT - it looks ready to "flee & be free" just sitting there.....
But, no DT - it looks ready to "flee & be free" just sitting there.....
Cheers,
Wayne
Once a Retrobate, always a Retrobate............
Wayne
Once a Retrobate, always a Retrobate............