Merco 61Mkiv Carb

Something to sell, buy or swap?
List it here.
Post Reply
jackdaw
Posts: 165
Joined: 16 Feb 2018, 20:30
Location: Wet and Windy North Wales

Merco 61Mkiv Carb

Post by jackdaw »

WANTED
A bit of a long shot, but thought I'd ask.
Has any one got in their spares/junk box a complete twin needle carb for a Merco 61 MkIV; choke bore 7.25mm and spigot diameter 11.8mm.
Thanks.
User avatar
PaulJ
Posts: 598
Joined: 16 Feb 2018, 19:01
Location: Ipswich, UK

Re: Merco 61Mkiv Carb

Post by PaulJ »

Jackdaw,

I confess to not being very clued up on the different Mks of Merco 61 but there seem to be at least two different twin needle carbs. I don't know if it has the carb you are looking for but this appeared on ebay today at quite a low "Buy it now" price.......

https://www.ebay.co.uk/itm/Merco-61-Mod ... SwwlJdqGow

Paul
jackdaw
Posts: 165
Joined: 16 Feb 2018, 20:30
Location: Wet and Windy North Wales

Re: Merco 61Mkiv Carb

Post by jackdaw »

Saw that Paul. But, the throttle barrel location screw is sheared off and the whole engine looks to be a 'bitsa'. It has the later separate cooling jacket and liner(earlier models had a one piece steel unit) and the earlier thinner crankshaft. Which probably means an earlier crankcase with the smaller carb.
MJF
Posts: 81
Joined: 12 Jun 2018, 15:22
Location: Ontario Canada

Re: Merco 61Mkiv Carb

Post by MJF »

Hello from Canada jackdaw

Some Merco stuff was listed today on RC Canada
https://www.rccanada.ca/rccforum/showth ... p?t=578403

You might have to register to bid which cost nothing and is not a big deal.

Prices shown are in Canadian $$ which are not worth much!!

Hope the link works.

Mike F
Post Reply