Page 1 of 1

RCS lightning flash badges

Posted: 05 Feb 2021, 21:58
by stuart mackay
I have had the RCS badge 3d Modelled from my Tetraplex example and a prototype printed.

Before I press the button and get a batch commercially printed, was wondering if any others might be interested in one also to get their Guidance system or older RCS Reed systems back to an original condition.

These are as close as you will get to an original and have taken many hours modelling to get right.

They have the black infill to the ellipse and I ll take a side by side with an original and post here.

Price will be around £20 dependent on volumes that I order.

Please register your interest here and I ll contact you later when I have enough for an economic batch size to be produced.
Stuart Mackay RCS badge
Stuart Mackay RCS badge
Now on Ebay!

https://www.ebay.co.uk/itm/133714365082

Re: RCS lightning flash badges

Posted: 06 Feb 2021, 14:32
by Wavemeter
I’ll have one Stuart ;)

Re: RCS lightning flash badges

Posted: 07 Feb 2021, 09:57
by stuart mackay
Wavemeter wrote: 06 Feb 2021, 14:32 I’ll have one Stuart ;)
Noted Jonathan!

Re: RCS lightning flash badges

Posted: 09 Feb 2021, 12:45
by stuart mackay
here are some pics of the badges in place on a couple of RCS Txs
Guidance System
Guidance System
Side by side comparison
Side by side comparison
Overlaid on an original
Overlaid on an original
The colour difference is attributable to age discolouration of the plastic