PWM to SBUS

List all your sketches here
Post Reply
Martin
Posts: 744
Joined: 16 Feb 2018, 14:11
Location: Warwickshire

PWM to SBUS

Post by Martin »

This sketch reads up to 18 channels of PWM, and outputs the results as an (inverted) SBUS signal. You could easily modify the sketch to just output test SBUS signals (steady, ramping, etc.) rather than read the values from PWM inputs. Might be useful if you want to make an SBUS 'servo checker'.

Attachments
PWM2SBUS.zip
(3.82 KiB) Downloaded 126 times
Post Reply