Just finished converting my Macgregor MR200 transmitter to 2.4ghz, using one of Phil's single channel encoders and a Lemon 2.4ghz module. Just a morning's work, as I left the internals as is just disconnected the various leads and added the encoder, module and a 2s1p 450mah Lipo as power. Even easier than the Digimac 1+1 that I finished yesterday.
Ideally I'd have liked to not have to drill the two wee spyholes in the front of the transmitter to see the LEDs, I guess with a bit of extra work I could have worked it so that they were on the top of the transmitter case, but I hope that they don't jar too much and it's handy to have them visible.
Still putting some images in rotated, no matter what I do to them.
....no biggie! I edit the pics in my Android and for some reason they comes correct, Cheers
Macgregor MR200 Conversion to 2.4Ghz
-
- Posts: 118
- Joined: 30 May 2023, 16:52
- Location: Perthshire
- Contact:
-
- Posts: 118
- Joined: 30 May 2023, 16:52
- Location: Perthshire
- Contact:
Re: Macgregor MR200 Conversion to 2.4Ghz
Thanks Tobe.